Home and commercial EV charger installation, including Zappi smart chargers. Switchboard assessment, dedicated circuits and compliance certification included.
A dedicated EV charger gives you faster, safer charging than an ordinary powerpoint, and takes the load off the rest of your circuits. We install and configure EV chargers — including Zappi smart chargers — for homes, workplaces and multi-bay commercial car parks.
Not just a plug on the wall. Before we install anything, we check your switchboard's capacity and condition. Older switchboards often need an upgrade to safely run an EV charger alongside everything else in the property — we identify this upfront, not after the job's started.
Zappi chargers can integrate with solar and battery systems to prioritise free or low-cost charging — we can configure this as part of the install if you already have solar or are planning to add it.
If your switchboard needs an upgrade to support the new circuit, we quote and complete that as part of the same job — no separate call-out.
EV charger installs vary depending on charger type, switchboard condition and cable run length, so we quote each job individually — home, workplace or commercial car park.
We install EV chargers for workplaces, commercial car parks and multi-unit developments, not just single homes.
RCD and smoke alarm inspections for landlords, real estate agents, and property managers. Fixed $149. Same-day digital certificate.
An electrical safety certificate is a legal document issued by a licensed electrician confirming that a property's RCDs (residual current devices) and smoke alarms meet the required safety standards under Western Australian law.
In WA, this certificate is legally required:
Without a valid certificate, you risk delaying settlement, breaching tenancy regulations, and exposing yourself to liability.
Every PayneFree Electrical safety inspection covers two areas:
Once your property passes inspection, we issue the certificate immediately. Most properties are certified within a single visit.
Compliance certificates are time-sensitive. Delayed settlements and lease hold-ups cost you and your clients money.
Hard-wired smoke alarm inspections, testing and replacement for landlords and property managers. Same-day certification.
Western Australia has strict laws around smoke alarms in residential properties. All smoke alarms in rental properties and homes being sold must be hard-wired to the mains power supply.
Key WA requirement: All smoke alarms must be replaced after 10 years from the date of manufacture — not installation. As a landlord or vendor, it's your legal obligation to ensure alarms are within their service life before a tenancy or sale proceeds.
PayneFree Electrical checks every alarm against current WA regulations and replaces non-compliant alarms on the same visit. Your property won't be held up waiting for parts.
Smoke alarm compliance is included in our fixed-price Electrical Safety Certificate. One visit covers RCDs and smoke alarms together.
Smoke alarm compliance is one of the most common reasons a property gets held up before a tenancy or settlement. We make it fast to resolve.
Professional RCD testing and installation for Perth rental properties and homes being sold. Compliance confirmed same day.
An RCD (Residual Current Device), also called a safety switch, instantly cuts power when it detects a current leakage — protecting people from electric shock and reducing the risk of electrical fires.
WA legal requirement: All residential properties being sold or rented must have a minimum of two RCDs installed, protecting all power point and lighting circuits. This is verified as part of every electrical safety certificate.
If your property is missing RCDs, has the wrong number, or has RCDs that fail tripping time tests, we can install compliant switchboard RCDs on the same visit.
Call 0437 991 675. We confirm within a few hours and coordinate access with you or your tenant directly.
We inspect your switchboard, test each RCD to WA standards, and check smoke alarms at the same time. Most visits take 45–90 minutes.
If RCDs are missing or failing, we provide a fixed quote on the spot. With your approval, we install compliant RCDs the same visit.
Your electrical safety certificate is emailed to you or your agent the same day, confirming full RCD and smoke alarm compliance.
Missing or failed RCDs are one of the most common reasons an electrical safety certificate can't be issued on the spot. We come prepared to fix it the same day.
Property failed its electrical inspection? We carry the parts, quote on the spot, and get your certificate issued the same day.
Electrical remediation is the repair or upgrade work required to bring a property into compliance with WA electrical safety regulations — most commonly RCD installation, smoke alarm replacement, or minor wiring faults that prevent an electrical safety certificate from being issued.
Don't wait for a second visit. PayneFree Electrical carries the most common remediation parts — switchboard RCDs and hard-wired smoke alarms — to every inspection. Most compliance issues are resolved the same day, with no return trip required.
Missing or failed safety switches are the most common compliance issue in older Perth properties.
Battery-only, expired, or non-hard-wired alarms must be replaced before a certificate can issue.
Defects identified during inspection that affect certification — fixed on the same visit where possible.
Received a defect notice from another electrician? We assess, fix, and re-certify.
Call us directly on 0437 991 675. We prioritise time-sensitive jobs for real estate agents and property managers with upcoming settlement or lease start dates.
If you have an existing inspection report, share it when you book. We'll come prepared. If you're unsure, we assess on arrival.
We assess the property and provide a clear, fixed quote for all remediation work before we start. No surprises, no work without your approval.
With approval, we carry out all work immediately. We stock the most common parts so we rarely need to return.
Once complete, we conduct a final inspection and issue your electrical safety certificate the same day, emailed directly to you or your agent.
A failed electrical inspection doesn't have to delay your settlement or lease. We specialise in fast-turnaround remediation for property professionals under time pressure.
New circuits, partial rewiring, powerpoints, lighting and switchboard upgrades for home and commercial renovations and extensions. Rough-in through to fit-off, with compliance certification on completion.
Whether you're renovating a kitchen, adding a room, extending your home, or fitting out a commercial space, the electrical work needs to keep pace with the build — new circuits for updated layouts, additional powerpoints and lighting, and a switchboard that can safely handle the extra load.
Renovating an older property? Many established Perth homes and commercial premises have switchboards and wiring that predate current AS/NZS 3000 standards. We assess your existing setup early so there are no surprises once the build is underway.
We work directly with homeowners, businesses, builders and renovation contractors, coordinating around the trade schedule so rough-in and fit-off happen exactly when the job needs them.
Updated circuits for reconfigured rooms, new appliances, or ageing wiring in older properties.
Additional outlets and lighting to suit your new layout, from downlights to outdoor power.
Older switchboards often can't handle the extra load a renovation or extension adds.
Once the electrical work is done, we certify it so you have documentation on file.
Call us or share your plans and we'll walk through what the renovation needs — new circuits, switchboard capacity, powerpoints and lighting — with a clear, fixed quote.
Cabling and rough wiring are installed at the right stage of the renovation, coordinated with your builder or trades so there's no delay to the schedule.
Once walls, ceilings and fixtures are in place, we return to fit powerpoints, switches and light fittings, then test every new circuit.
We issue a Certificate of Electrical Compliance for the completed work, giving you documentation for your records or building approval.
We work directly with builders and project managers to keep electrical rough-in and fit-off on schedule, without holding up the rest of the job.
We cover the coastal suburbs within 20km of Sorrento. Here are the areas we regularly service.
Call 0437 991 675 to confirm your suburb.
Fixed $149. Same-day digital certificate. All repairs handled same visit.
📞 0437 991 675